Hello Editsuite.com friends,

Due to tons of abuse, we now require that you request user access by sending us your Login, Name, Email Address, Phone Number, and Profession by submitting that info HERE.  I'll review your request and try to get back to you within the week.  You can't imagine how many folk want to trash forums with bogas advertising. 

Also, please help us gain enough Facebook "Likes" to have a custom Facebook URL!  

--Gary Lieberman

Event 20/20 BAS Studio Monitors, AVID and Final Cut Pro

Event Studio Monitors 20/20 bas biamplified monitor system purchased in 2002 and used on a few TV shows.

These are in excellent working condition and cosmetic condition. This version #1 is of a series that is very desirable by audiophiles in the music recording industry.   


I have 10 single monitors available

20/20bas Biamplified Monitor System V1

 

  • LF Driver: 8" mineral filled polypropylene cone with 1 1/2" diameter high temperature voice coil and damped rubber surround.
  • HF Driver: 25mm ferrofluid cooled natural silk dome.
  • Frequency Response: 45Hz - 20kHz, 2dB, Ref 500Hz.
  • Crossover: Active fourth order.
  • Acoustical Crossover: 2.6kHz.
  • LF Amplifier Power: 130w continuous.
  • HF Amplifier Power: 70w continuous.
  • Input Connector: Combo XLR - 1/4" connector with gold contacts accepts balanced or unbalanced sources.
  • Polarity: Positive signal on + input produces outward cone displacement.
  • Input Impedance: 40kohms balanced, 20kohms unbalanced.
  • Input Sensitivity: 1.1V input produces full output with Input Level control at maximum.
  • Input Level Control Range: 20dB.
  • LF Trim: Continuously variable control calibrated in 1dB increments Max boost/cut settings produce 3dB @ 100Hz, 2dB @ 400Hz.
  • HF Trim: Continuously variable control calibrated in 1dB increments Max boost/cut settings produces 3dB above 2.6kHz .
  • Subsonic Filter: -3dB @ 30Hz.
  • Protection: RF interference, output current limiting, over temperature, turn-on transient, subsonic filter, resettable mains circuit breaker.
  • Indicators: Combination POWER ON/CLIP LED indicator.
  • Power Requirements: Factory programmed for either 120V or 220-240V~ 50/60Hz, 200VA. Power via detachable 3 circuit IEC type linecord.
  • Cabinet: 5/8" vinyl laminated MDF.
  • Dimensions: 10 1/4" W x 14 3/4" H x 11 3/4" D
  • Weight: 30 lbs each

Contact: Lewis 310-979-3500