Kayenne delay Running with a Macro
- Login to post comments
I built a effect that uses a timeline with a macro in it that does a ME3 cut. I then record another macro that recalls that timeline effect and then runs it. I have tried various delays with the run in the macro but I seem to have to put a really long delay in to get it not run the cut portion of the macro before the server element keys and runs.
On a Kalypso I have the same thing built with a .3 delay and it works fine. I am not sure what is causing the differnece on the Kayenne. It is a little strange on this truck because I am using the internal manchine controls of the Kayenne hooked to a K-2 server. So if some one has a idea I would appricate it.
Are you using a K2 with your Kalypso?
John
That's what I wondered. The K2 and the EVS are very differnt servers and have a very different load time. What you are seeing is the latency in loading the K2 which is a lot longer than the EVS. Your choice is to increase the delay after loading and before any run commnad or use a "Load" and separate "Run" button so that you put the delay in. Try a 1:12 delay and work down from that.
John
- Login to post comments
No I am using a spot box. This is the first truck that I ran into with the K-2 for the server.